Aspire Dynamo Kit *Batteries Not Included
1* Dynamo mod / 1* Nepho Tank / 1* Glass tube / 8* O-rings / 2* Coils (1*0.5Ω & 1*0.15Ω Mesh Coil) / 1* USB Cable / 1* Warning card / 1* User manual / 1* Warranty card / 1* Dual 18650 battery adapter
Aspire Dynamo Kit Allows for use with three different battery types, 18650, 20700 or 21700. The Dynamo can be used in various modes, to select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3).
Press fit Nepho coils supplied with the Nepho Tank come in two types with two resistances. A 0.5ohm Kanthal wire coil and Aspires mesh coil rated at 0.15 ohms, made with Kanthal wire. Both have excellent wicking properties due to the large wicking ports.
Nepho coil Installation
Unscrew the base hardware, pull out the used coil, replace it with a new one (it just drops in) and screw the base hardware back to the tank.Nepho coils are press fit so are much less messy to handle when replacing.
Turn off the MOD and remove tank. Pull the lock catch to allow the battery door to open. When replacing the batteries, please pay attention to the correct positive and negative connections. Then insert the battery of your choice, 18650 (use the supplied silicon adapter), 20700 or 21700. Insert the batteries as seen in the diagram and close the battery door, ensuring the door catch is securely fastened.
Please note: due to the mod being designed to be compatible with 21700 batteries, when using 20700 batteries in this mod, there will be a 1mm gap, if you shake the mod vigorously with the 20700 batteries inside which is not recommended, you may hear a rattling sound, This will not in any way affect the function or performance of the mod.
Press fire button to enter. When you are in “Time Set”press fire button to choose the value you want to adjust, press up or down button to change the values and turn on or off the watch. Enter Watch UI to choose your preferred watch UI displayed on your mod, we’ve created 11 different types of Watch UI to expand your choices.
Charging the mod via Micro-USB charging port, the charging current can reach up to 2A . When connecting the mod to the charger, the screen will display two growing battery icons with the 2 circular rings around the screen edge showing a rotary movement when charging. The screen also displays the battery percentage, charge time and charge current. Once the battery level reaches 4.2V or when it’s fully charged, the mod will stop charging the screen will shut off.
The mod will not charge when the batteries are incorrectly installed or when there’s only one battery installed. The batteries cannot be replaced while charging, please unplug the charging cable before changing the batteries.
WARNING: Our products are only intended for use by adults of legal smoking age and should not be used by children, women who are pregnant or breastfeeding, or persons with or at risk of heart disease, high blood pressure, diabetes or taking medicine for depression or asthma. Keep away from children and pets. If you choose to vape e-liquids that contain nicotine, please be advised that nicotine is a toxic substance that is addictive and habit forming. Please check with your e-liquid supplier. Follow the instructions provided.